ASUS RT-AC68U Manual |
To get the best transmission of wireless signals between the wireless router and network devices connected to it, make sure that: place the wireless router in a centralized area for maximum network devices for wireless coverage. Keep the device away from metal obstructions and away from direct light from the Sun. Keep the device away from devices Wi-Fi 802.11 g or 20 MHz, 2.4 GHz, Bluetooth devices, cordless phones, transformers, engines of heavy-duty, fluorescent lighting, microwave ovens, refrigerators and other industrial equipment to avoid the interference of signals or loss. Always upgrade to the latest firmware. Visit the ASUS website at http://www.asus.com for the latest firmware updates. To ensure the best wireless signal, orient three detachable antennas as shown in the picture below.
To set up your wireless network, you need a computer that meets the following system requirements: port Ethernet RJ-45 (LAN) (10Base-T / 100Base-TX / 1000baset). IEEE 802. 11a / b / g / n / ca wireless capability. A service TCP / IP installed. A web browser such as Internet Explorer, Firefox, Safari or Google Chrome. If your computer does not have built-in wireless capability, you can install adapter WLAN IEEE 802. 11a / b / g / n / ac on your computer to connect to the network. With its dual-band technology, your wireless router supports Wireless 2.4 GHz and 5 GHz signals simultaneously. This allows you to make Internet-related activities such as browsing the Internet or read/write emails using the 2.4 GHz band while simultaneously transmitting audio files / high definition such as movies or music video using the 5 GHz band. Some devices IEEE 802. 11n that you want to connect to your network can or can not admit Band 5 GHz. refer to the specifications in the manual of the device. Ethernet RJ-45 cables to be used to connect network devices must not exceed 100 meters.
Use a connection cable to configure your wireless router to prevent possible configuration problems. Before you configure your ASUS wireless router, do the following: If you are replacing an existing router, disconnect it from the mains. Disconnect the cables from your existing modem configuration. If your modem has a battery backup, remove it also. Reset the cable modem and the computer (recommended). You can use a straight cable or a cable crossed to the connection cable.
0 Response to "ASUS RT-AC68U Manual"
Post a Comment